Windshield Wipers and Washer

Windshield Wipers and Washer

Intermittent

  • From the OFF position, move the wiper stalk one click up to activate the intermittent wipers with rain-sensing.
  • The switch on top of the stalk varies the time interval between each wipe.
  • The farther the switch is moved to the right, the shorter the interval between each wipe will be.

Note: Ensure wiper stalk is in OFF position before entering a car wash.

Rain-Sensing Wipers

To activate and deactivate wipers within the Infotainment touchscreen.

  1. Select Car.

  2. Select Settings.

  3. Select Mirror and wiper settings.

  4. Select Automatic wiper during rain. A check mark indicates it is active.

Note: Applies to vehicles equipped with rain sensors.

Continuous

  • LOW: From the OFF position, move the wiper stalk up two clicks.
  • HIGH: From the OFF position, move the wiper stalk up three clicks.

Rear Wiper

To operate, push the wiper stalk one click away from you. If you have the front wipers on and you put the car in reverse, the rear wiper activates in a single wipe. Push and hold the wiper stalk away from you further to activate the rear window washer system.

Rear View Camera Washer System

With the vehicle in Reverse, press and hold the wiper stalk away from you to activate the rear window washer system. A stream of washer fluid will also be directed onto the lens of the Rear View Camera.

Service Position

With hood closed and ignition off, press and hold the windshield lever down. Wipers will move into the service position. Lift wipers by arm away from windshield. Before driving, fold wiper arms back onto the windshield. Turn ignition ON, and press the wiper lever down briefly. The wipers will move back to the park position.

Watch the Windshield Wipers video.

Warning: See TPMS, Keyless Access and Wipers in your Infotainment System Booklet for more detailed information and for important safety warnings.