IQ.DRIVE
Features

Activate Cruise Control or Adaptive Cruise Control

Activate Cruise Control or Adaptive Cruise Control

Locate the Cruise Control buttons on the left side of the multi-function steering wheel.

  • Press the button to activate Cruise Control or Adaptive cruise control.
  • A speedometer icon or will appear in the instrument cluster display.

Watch the Cruise Control video.

Set Cruising Speed

  1. When you get to your cruising speed, press the SET button on the multi-function steering wheel.
  2. A green cruise control indicator light or  will illuminate in the instrument cluster display.
  3. To increase/decrease the speed by 1 mph increments, press the + or — button.
  4. To increase/decrease the speed by 5 mph increments, press and hold the + or — button.

Cancel and Resume

  1. To cancel the cruise speed, press the brake pedal or press the button once on the multi-function steering wheel.
  2. The green CRUISE indicator light will go off or . Your last selected speed stays in memory until you turn off the ignition or turn Cruise Control off.
  3. To resume your set speed, press the RES button on the multi-function steering wheel.

Turning Cruise Control System Off

  • Press twice.

Adaptive Cruise Control Distance Level Setting

This feature is not a substitute for attentive driving.
Adaptive Cruise Control (ACC) helps maintain an individually stored constant speed and a previously set distance between your vehicle and those in front of you. When you approach a slower moving vehicle in front of you, the vehicle may brake if the situation requires. When the vehicle is no longer present, ACC will accelerate back to the stored speed. You can set the speed-dependent distance from the vehicle ahead to one of five levels.

  • To change the ACC distance interval, press the button to cycle through the distance intervals until you reach your desired distance level. When the shortest interval is reached, the distance returns to the greatest interval when the button is pressed again.

  Watch the Adaptive Cruise Control video.

Travel Assist System

This feature is not a substitute for active driving.

Within system limits, Travel Assist system enables your vehicle to steer, accelerate, and brake automatically while also keeping the vehicle centered in lane. Travel Assist can also maintain a constant distance to vehicles in front which is selected by the driver. The driver must maintain supervision as the Travel Assist system is not an autonomous feature.

To enable Travel Assist:

  1. Press the button on the multi-function steering wheel to activate Adaptive Cruise Control.
  2. Press the button to switch from Adaptive Cruise Control to Travel Assist.
  3. Press the SET button on the steering wheel at the desired speed.
  4. To cancel the Travel Assist, press the brake pedal or press the  button on the steering wheel.
  5. To resume Travel Assist, press the RES button on the steering wheel.

Emergency Assist

This feature is not a substitute for active driving.

Emergency Assist can recognize driver inactivity and can automatically keep the vehicle in its lane and, if necessary, slow it down to a stop. While the ignition is on, Emergency Assist is active when:

  • Lane Assist or Adaptive Cruise Control (ACC) are active and the vehicle is in forward motion.
  • The system can detect lane markers on the left and right side of the vehicle.

Note: If Lane Assist is not available, Emergency Assist will not be active.

Deactivating Adaptive Cruise Control

To deactivate Adaptive Cruise Control, and use Conventional Cruise Control:

  1. Press the button. Depending on vehicle equipment it may be on the steering wheel or the end of the turn signal stalk located on the left side steering wheel controls.
  2. Using the vertical menu buttons on the steering wheel, scroll to Speed.
  3. Select Cruise Control in the Digital Cockpit then press the button.

Adaptive Cruise Control is now deactivated, and your vehicle will maintain the set speed using conventional cruise control, until the next ignition cycle.

Assistance System Setting

Assistance System Setting

If your vehicle is equipped with Driver Assistance features, you can access the Assistance system settings menu in the Infotainment system, allowing you to modify Driver Assistance feature operation.

  1. Press Menu.
  2. Press the Assist Syst. icon on the display.
  3. Touch the image that represents the feature.
    OR
    Touch to access Assistance system settings.

Warning: See Driver Assistance Systems in your Owner's Manual for more detailed information and for important safety warnings. Driver Assistance features are not substitutes for attentive driving.