The ID. Buzz has an intuitive shifter on the right side of the steering column. Twist to activate Drive or Reverse, or press the button on the end to engage Park.

From the N position, where no power is transmitted to the wheels and the braking effect of the electric drivetrain is not available:

• D: Twist the gear selector forward.
• B: Twist the gear selector forward twice. This will engage energy recuperation when coasting.
• R: Twist the gear selector toward you. Only select this gear when the vehicle is stationary.
• : Only switch on when the vehicle is stationary.

Watch the Multi-Function Steering Wheel and Gear Selection video.

AC Charging

Level 1 AC charging can be done at home using a Level 1 charging cable. This is the slowest form of charging and is typically used overnight as supplemental charging.

Level 2 AC charging can be done at a charging station, by using a Level 2 charging cable, or by using a wall box which offers higher AC power than a standard outlet.

2-in-1 Mobile EV Charge Cable

Volkswagen offers a 2-in-1 Mobile EV Charge Cable, which offers both Level 1 and Level 2 charging capabilities. Please reach out to your preferred dealer to check availability or scan the QR code below.

Level 3 DC charging can be performed at a public charging station where it is charged with a very high charging power. This significantly reduces the charging time.

How to Charge the Vehicle

Connecting the Charging Cable

1. With the vehicle unlocked, press on the left side of the charge port door.
   _{Note: The rear passenger sliding door will not open all the way if the charge port door is open.}

   • If using a DC fast charger, remove the DC protective cap from the charge port.

2. Plug in the charging cable, making sure the cable is secure. Do not press the button on top of the connector when inserting.

3. If using a public Level 2 or Level 3 charger, you may need to activate the charge via mobile app, charger screen, or other instructions on the charger.

Depending on your charge settings, the charge session may start immediately or begin later if a scheduled charge is programmed. A green indicator light near the charge port confirms a successful connection and active charge session. In addition, you'll see charging status details displayed in the vehicle's Infotainment screen.

^{Note: A very high charging power is used for DC fast-charging. Frequent fast-charging can permanently decrease battery capacity. Charge the high-voltage battery primarily with AC power.}

Disconnecting the Charging Cable

1. Unlock the vehicle.

   • If “Unlock AC charging connector automatically” is enabled in the charging settings, the charging connector will automatically unlock once Level 1 or Level 2 AC charging is completed. To activate this feature, go to Charging > Settings > Unlock AC charging connector automatically and enable the feature with the toggle.

2. Press the release button on the charging connector and remove the charging connector.

   • If using a DC fast charger, replace the DC protective cap on the charge port.

3. Press the charge port door to close it, ensuring it fully latches with an audible click.

Charge scheduling can be used to limit when the vehicle charges in order to take advantage of off-peak electricity rates (if you are enrolled in a plan from your electrical utility that offers variable rates), or to ensure the vehicle is freshly charged for a planned journey.

To set up a charging schedule:

1. Save a charger location by opening the Charging app from the App menu.

2. Select Locations in the left navigation bar.

3. Tap “Add current position as a charging location” and enter a name for the location, then select OK.

4. Tap one of the timer icons or > to open the scheduling menu.

5. Set the desired departure time and select the days of the week for this departure, as well as if you want it to repeat.

You can also set the Climatronic system to have the cabin pre-conditioned for the departure. Heating the cabin in cold weather also warms the battery for better performance.

To set the desired temperature:

1. Open the Aux. climate app from the App menu.

2. Select Climate ctrl. in the left navigation bar.

3. Set the desired temperature via – or +, and toggle “Automatic window defogger” on or off as desired.

4. Select Departure in the left navigation bar.

5. Tap one of the timer icons or > to open the scheduling menu.

6. Set the desired departure time and select the days of the week for this departure.

7. To enable, check the box next to the desired departure time.

8. Enable “Include climate control” in your charge schedule.

The 2025 Volkswagen ID. Buzz includes 3 years of Electrify America Pass+ membership¹ with Plug&Charge² and 500 kWh of charging on us! Pass+ members save about 25% off the Electrify America base charging rate as compared to Guest and Pass members. Electrify America expects to have more than 1,700 charging stations with over 9,500 chargers along major highways and cross-country routes by the end of 2025 to keep you charged on road trips.

1. Open the Electrify America app on your mobile device and create an account (requires email verification). If you already have an Electrify America account, tap Account at the bottom of the screen.

2. Tap Choose Membership Plan, then scroll down and tap Premium Offers.

3. Input your 6-digit enrollment code, available from your selling VW dealer or VW Customer Care at 1-800-822-8987, and select the 2025 ID. Buzz Charging Plan. Follow the instructions in the app to activate the Charging Plan and Plug&Charge.

Put convenient tools and information at your fingertips¹. Enjoy these features:

• Service reminders², scheduling, and history³
• Roadside assistance requests⁴
• Owner’s literature and tutorials

Plus, with subscriptions to Remote Access⁵ and Vehicle Insights⁶ via the myVW app⁷, you can access features such as:

• Remote Battery Charging⁸
• Remote Climate Controls⁸
• Remote Lock/Unlock⁸
• Remote Door and Window Status⁸
• Charging Station Locator⁹
• Check battery charge level, estimated range, and odometer¹⁰

Enroll in myVW

Below process applies if enrollment was not performed by a dealer.

Enrollment in the myVW mobile app⁷ begins in the vehicle. Before you’ve enrolled, you’ll be prompted within your infotainment touchscreen to create a primary user profile, which will kickstart the myVW enrollment flow.

Or, if you missed the initial prompt, here’s another way to enroll:

1. Download the myVW app.

2. Click Sign up.

3. Enter your email and a password.

4. You’ll get an email; click Verify your email address.

5. Follow the steps in the app to set up your account.

6. If your vehicle does not automatically show up in the app, it will prompt you to:
   • Enter your VIN (Find this below the windshield on the driver’s side).
   • Use the app to scan a QR code in your infotainment screen (Find this under Users).

Watch the myVW Mobile App Overview video.

To learn more, check out vw.com/owners

Easily adjust important battery and charge settings¹⁰ in the myVW mobile app⁷. From the mobile app home screen, select the ellipses icon in the upper right corner of the vehicle image, and choose Battery.

In situations where the 12-volt battery is too low for myVW and your ID. Buzz to communicate, enabling the “Energy management”¹⁰ function will use energy from the high voltage battery to help support remote requests.

Energy usage from the high-voltage battery for remote and other operations can affect actual vehicle range.¹¹

Battery Care Mode

To automatically set your battery’s target state of charge (SOC) to 80%, toggle “Battery Care Mode” to ON.¹⁰

Target Charge Level

Adjust your target state of charge (SOC) using the slider.¹⁰

_{For everyday use, we recommend setting the maximum SOC to 80% to prolong the life of the high-voltage battery. We recommend charging the high-voltage battery to 100% only before long journeys. See your Owner’s Manual for more detailed information and important safety warnings.}

Charge Current

You can help control the charging power delivered to your vehicle by setting the charge current.¹⁰

To get the most available charge power possible, set to “Max”.

In situations where load reduction on your local power supply is needed, set to “Reduced”. Doing so will limit the power draw to 10 amps.

Release Charging Connector

When plugged-in and actively charging, the vehicle locks the charging cable in place to ensure a secure connection.

If using a Level 1 or Level 2 charger, you can set the frequency of which you’d like the vehicle to automatically unlock¹⁰ the charge cable once the session is complete.

• Always
• Once
• Never

In the “Navigation” menu, you can search for points of interest using the “Search” field, and easily filter charging stations⁹ and parking locations nearby.¹²

When searching for a charging station, you can filter by availability, and easily see information about the charging station, such as connector type and maximum power.

Once you’ve found your destination, you can also send directions right to your vehicle’s navigation system, helping to save you time in advance of your next journey.

Manage Notifications

Stay “in-the-know” by setting up your in-app notifications.⁷

Added peace of mind can be found with 5 years of included VW Car-Net® Safe & Secure.¹⁷
You’ll get:

• Automatic Crash Notifications¹⁸ – When your vehicle detects a deployed airbag or rollover, it will automatically connect you with the Volkswagen Response Center to see if you need assistance.

• Emergency Assistance¹⁸ – If you or a passenger need help, just press the SOS Button in your vehicle and the Volkswagen Response Center can send help to your vehicle’s location.

• Information Assistance – You can contact one of our agents for help, all while keeping both hands on the wheel and your eyes on the road.

After you’ve accepted the myVW and VW Car-Net® terms of service, you can enroll in Safe & Secure from the Shop tab in the mobile app.⁷

The ID. Buzz allows users to personalize their experience right from the infotainment touchscreen. Configure shortcuts and widgets, re-order app icons, and access controls for key vehicle functions.
_{Only perform the actions described here when safely parked, and do not drive while distracted.}

To customize the order of icons in the App Menu:

1. Touch and hold an icon.

2. Drag and drop the icon to the desired location.

The touchscreen allows users to create customized “widget pages” with their most desired features.

To create a new page layout:

1. Tap HOME.

2. Tap and hold an existing tile until an additional window appears.

3. Touch the + button and choose a page layout of your choice.
   NOTE: New tiles are created without any functions.
   
   

To customize widgets:

1. Tap HOME.

2. Tap and hold an existing tile until an additional window appears.

3. Tap on the tile you want to change.

4. Tap the desired function in the additional window. Some features are not available in all tile sizes.

The desired features are now ready for touch control.

• The Climate Control widget offers several swipeable screens to best suit you.

• The Navigation widget provides easy input of destinations and Points of Interest.

• The Phone widget puts call information at an easy-to-read level.

• The Radio widget gives quick access to audio selections. Tap a station to select.

The Radio widget can control all of the functions of the media system.

Controlling Climatronic

To control the heating, ventilation, and air conditioning (HVAC) system, use the convenient climate control bar at the bottom of the Infotainment touchscreen. Quickly adjust air distribution and fan speed by tapping this icon next to the CLIMA button.

You can also press the CLIMA button on the climate control bar or tap the Climate ctrl. app icon from the app menu for more advanced controls.

1. Fan: Tap the + and - buttons to manually adjust the fan speed.

2. Temperature Adjustments:

• Via Touchscreen: To change the temperature, press the temperature number for the driver or passenger side. A popup will show a vertical slider — tap or slide your finger up for warmer or down for cooler.

• Via Slider Bar: You can also use the slider bar to adjust the temperature, using the same concept. Tap or slide your finger left for colder temperature and right for warmer.

• Sync: This function sets the climate system to a consistent temperature for all seats, based on the driver zone settings. Press the SYNC button located on the lower left side of the CLIMA screen, below the vent controls.

• AUTO Mode: The set air temperature is maintained for you by automatically controlling the fan speed and air distribution.

3. Seat Heating and Ventilation: Tap the icons within the climate control bar to activate or adjust intensity. An Auto On function is also available, located within the settings menu.

4. Steering Wheel Heating: Tap the steering wheel icon on the right side of the CLIMA screen or use the button on the right side of the steering wheel. An Auto On function is also available, located within the settings menu.

5. Rear Climate Controls: Press the REAR button located on the right side of the CLIMA screen to open the settings for the rear passenger compartment. From this screen, tap  to lock or unlock the climate control bars in the rear vehicle interior.

The Smart dropdown offers smart climate controls, which automatically trigger the HVAC system to perform selected actions.

• Clear View : Clearing fog and ice from the windshield. 

• Cool Feet and Warm Feet : Directing warm or cool air to the footwell.

• Fresh Air : Directing fresh air from outside into the interior.

• Warm Hands : Directing warm air onto the steering wheel.

• Quick Heating and Quick Cooling : Temporarily increasing the heating or cooling power.

Intermittent/Rain-sensing

• From the OFF position, move the switch on the front of the wiper stalk to the first AUTO position to turn on the rain sensing function with low sensitivity.

• Move the switch to the second AUTO position for high sensitivity.

• Rain sensing can be enabled and disabled within the Infotainment system display. From the App Menu, select Vehicle, then Exterior, and then tap Wipers. Toggle “Automatic wiping during rain” on or off depending on your preferences.

For vehicles with the rain sensing feature turned off:

• The AUTO options vary the time interval between each wipe.

• From the OFF position, move the switch on the front of the wiper stalk to the first AUTO position for a longer interval.

• Move the switch to the second AUTO position for a shorter interval.

_{Note: Ensure wiper stalk is in OFF position before entering a car wash.}

Continuous

Move the switch on the front of the wiper stalk to the LOW or HIGH position for low or high speed continuous wiping.

1. With the ignition on and the vehicle in Park, turn the Infotainment system on. Your vehicle’s Bluetooth system will be in “discovery” mode.

2. From the Bluetooth menu on your phone, search for new devices and select My VW XXXX (last four digits of VIN).

3. A connection request will appear on the Infotainment touchscreen display.

4. Press Connect on the Infotainment touchscreen.

5. The touchscreen will then show a PIN.

6. Make sure the same PIN is displayed on your phone and press Yes on the Infotainment touchscreen, then press Pair on your phone.

7. Allow contacts to sync when prompted.

^{Note: If your phone displays a prompt asking to connect to your vehicle, make sure to enable future automatic connections. This will help to automatically reconnect the compatible paired device to the system. Once the PIN is shown, pairing must be completed within 30 seconds; otherwise, the process will need to be repeated.}

The Bluetooth system will interrupt your car stereo with a ringtone.
Press the OK button on the multi-function steering wheel or the green Phone icon on the Infotainment touchscreen to answer the call.

Volume Settings

To adjust the volume of the Bluetooth system while on a call, press or swipe the Volume Down or Volume Up slider on the left side of the multi-function steering wheel.

End a Call

Press the red Phone icon within the phone menu of the Infotainment display.

Before starting your route, charging-related navigation settings can be modified within the Navigation menu. Select Settings, then e-route planner.

Add charging stops automatically:

• Toggle on “Add charging stops when route guidance is active” to automatically include charging stations in your planned routes.

Optimize charging capacity:

• Toggle on “Automatic optimization of the quick charge function during active route guidance to a DC charging station” to automatically optimize charging capacity at DC fast charging stations.
• When this option is selected, the time necessary for battery heating is calculated automatically.
• The heating is switched on before the next charging stop is reached to optimize your charging rate.

Many functions of the ID. Buzz—including the navigation, climate control, media, and telephone—can be controlled using IDA, your built-in voice assistant. IDA can be launched using the Talk button on the multi-function steering wheel or by using the wake word, “Hello Volkswagen,” similar to how you would activate a virtual assistant at home.

To enable activation of IDA by voice:

1. Open the App Menu on the touchscreen and then select IDA.
2. Tap Activation.

Here, you can toggle the ability to activate IDA by voice. You can also enable or disable the additional wake words “Hello IDA” and “Hello ID.” and even create your own wake word by pressing the microphone or keyboard icons.

To launch IDA with the multifunction steering wheel button:

• A short press of the Talk button will launch IDA.
• A long press of the Talk button will launch the digital assistant of a connected compatible mobile device.

A variety of voice prompts are available depending on which language has been set in the Infotainment system, and whether there is an active myVW account for the vehicle. For full details and a list of compatible languages, please refer to the owner’s manual.

A list of example prompts can also be found in the IDA app under Tips in the left navigation bar.

Cancel Active Voice Control

When IDA is activated, press the Talk button on the multi-function steering wheel or say “Cancel.”

You can access the Assistance system settings menu in the Infotainment system to modify Driver Assistance feature operation.

1. Open the Assist syst. app from the App Menu.

2. Touch the image that represents the feature you want to view.

OR

Touch the List  button to show the system menu in list form for further selection.

Adaptive Cruise Control

Adaptive Cruise Control (ACC) helps drivers maintain a constant speed and distance from the vehicle ahead using sensors to detect other vehicles. The system can reduce the speed of the vehicle if there is a slower moving vehicle ahead, bring the vehicle to a standstill, and resume speed regulation as long as the vehicle in front is moving again.

Locate the Cruise Control buttons on the left side of the multi-function steering wheel.

• Press the button repeatedly to cycle between Adaptive Cruise Control, Cruise Control, and Travel Assist.
• A speedometer icon for cruise control , Adaptive Cruise Control , or Travel Assist will appear in the instrument cluster display. ACC is the default cruise control system.

Adjusting the Distance

You can set the speed-dependent distance from the vehicle ahead to one of five levels.

• To change the ACC distance interval, press the button to cycle through the distance intervals until you reach your desired distance level. When the shortest interval is reached, the distance returns to the greatest interval when the button is pressed again.

Predictive Adaptive Cruise Control is an extension of ACC that uses the Dynamic Road Sign Display system and Navigation data from the Infotainment system to adapt the vehicle’s speed to known speed limits and to the road layout ahead.

Predictive ACC options can be enabled or disabled before your drive from within the ACC (Adaptive Cruise Control) menu of the Driver assistance system settings menu.

• Reaction to Maximum Permitted Speed: Adjusts the vehicle speed to changes in posted speed limits read by the Dynamic Road Sign Display system.
• Reaction to Route Ahead: Adjusts the vehicle speed on approach to most curves, roundabouts, and intersections. May also slow the vehicle at the next respective turn off if you indicate your intent to turn with the turn signal.

With either of these options enabled, Predictive ACC will automatically be used when using Adaptive Cruise Control or Travel Assist.

Travel Assist System

The Travel Assist feature is a semi-automated driving assistant that blends the functions of Adaptive Cruise Control and Lane Assist to help your Volkswagen maintain a safe distance from the vehicle ahead and help keeps you centered in the lane. The driver must maintain supervision as the Travel Assist system is not an autonomous feature. Lane Assist must be enabled for Travel Assist to work.

To Enable Travel Assist:

1. Press the  button on the multi-function steering wheel to cycle between ACC, cruise control, and Travel Assist.
2. Press the SET button on the steering wheel at the desired speed.
3. To cancel Travel Assist, press the brake pedal or press the  button on the steering wheel.
4. To resume Travel Assist, press the RES button on the steering wheel.

Watch the Cruise Control Systems video.

Qi-capable mobile devices can be charged wirelessly in the wireless charging tray located in the dash to the right of the steering wheel.

1. Remove any foreign objects from the tray.
2. Remove any protective case if not Qi-compatible and place your device into the tray facing up.
3. A white Qi symbol will appear on the Infotainment screen to confirm that the charging process has started.

Control exterior light functions, plus window heating and ventilation using the touch panel located to the left of the steering wheel.

1. Switch on the ignition.
2. Tap the  button repeatedly until the desired exterior light setting is highlighted on the ID. Cockpit screen and illuminated on the touch panel.

• 
  : When this icon shows in green, the low beams are on.
• 
  : Automatic headlights are enabled. The low beam headlights are switched on or off depending on the ambient brightness.
• 
  : When this icon shows in green, the parking and daytime running lights are on.
• 
  : The Climatronic defrost function clears fog and ice from the windshield. The air is dehumidified and the blower is set to a higher speed.
• 
  : (If equipped) Switch the heated windshield on and off when the vehicle’s drive system is activated.
• 
  : Switch the rear window defroster on and off when the vehicle is drive ready. The rear window defroster switches off automatically after a maximum of 10 minutes.
• 
  : Poor weather lights can help illuminate the road more effectively when visibility is poor. To switch on, the vehicle’s ignition must be on.

Operating the Rear Windows from the Driver’s Door

The driver’s side door features two window switches which control all four of the vehicle’s windows. To operate the rear sliding windows from the driver’s door:

1. Tap the REAR control to activate operation of the rear sliding windows. When activated, the word “REAR” illuminates.
2. To open the window, press the respective switch. To close, pull the switch.
3. Briefly tap the REAR control again to de activate rear window operation.

To easily control all four windows at once, press and hold the REAR control until it flashes and then use the driver’s window switch to adjust the windows as desired.

^{Note: If a control switch is not used within about ten seconds after REAR is pressed, control will return to the front windows.}

From the Center Console

• Press  to automatically open or close the right electric sliding door.
• Press  to automatically open or close the left electric sliding door.
• Press  to disable the automatic sliding doors. The rear sliding doors can still be manually operated.

From the Second Row

• Press the button on the inside of the B-pillar of the desired door to automatically open or close it.

_{Note: Rear doors will not open completely if the respective rear window is open. Rear passenger door also will not open completely if the charge port door is open.}

Adjusting the Trunk Lid Opening Angle

If the space behind or above the vehicle is not large enough to allow the trunk lid to open completely, you can change how far the trunk lid opens.

1. Interrupt the opening or closing process at the desired open position by pressing and holding the button on the trunk lid. It must be at least half open.
2. The hazard lights will flash once and the vehicle will make an audible alert to confirm that the adjusted opening angle is saved.

Seat comfort can be precisely tailored to meet the needs of the driver with 12-way power adjustable seats with memory and massage.

The driver and passenger seat will have a set of controls located on the sideboard of the seat.

1. Slides the seat forward or back.

2. Adjusts the backrest angle.

3. Raises or lowers the seat cushion.

4. Adjusts the 4-way lumbar support.

1. Adjust the driver's seat and outside mirror positions to your preferred positions.

2. Press and release the SET button.

3. Press and hold the desired Memory button 1 or 2 until the chime sounds.

Massage Function

When the back massage feature is switched on, the lumbar support moves and massages the lumbar region of the back.

The massage feature for the driver’s seat can be turned on and off using the massage button below Memory button 2 on the driver’s seat:

1. Press the button once to turn the feature on.

2. Press the button a second time to turn the feature off. It will also turn off automatically after about ten minutes.

The massage feature for the driver and front passenger seats can also be controlled and configured within the Infotainment screen:

1. From the App menu, press Seats.

2. Select Massage, if necessary.

3. Select Driver or Front passenger to control the massage for the respective seat.

4. Adjust the duration, intensity level, and program as desired.

5. Tap Start to begin the selected massage program.

6. Tap Stop to turn off the massage function. It will also turn off automatically after the selected duration has elapsed.