Climate Control/
Windshield Wipers

Limpia parabrisas

Intermitente/Con sensor de lluvia

For vehicles with rain/light sensing turned on:

  • From the OFF position, move the switch on the front of the wiper stalk to the first AUTO position to turn on the rain/light sensing function with low sensitivity.
  • Move the switch to the second AUTO position for high sensitivity.
  • Rain/light sensing can be enabled and disabled within the Infotainment system display. From the App Menu, select Vehicle, then Exterior, and then tap Wipers. Toggle "Automatic wiping during rain" on or off depending on your preferences.

For vehicles with rain/light sensing turned off:

  • Las opciones AUTO modifican el intervalo de tiempo entre cada pasada.
  • From the OFF position, move the switch on the front of the wiper stalk to the first AUTO position for a longer interval.
  • Mueve el interruptor a la segunda posición AUTO para un intervalo más corto.

Note: Ensure wiper stalk is in OFF position before entering a car wash.

Continuo

Move the switch on the front of the wiper stalk to the LOW or HIGH position for low or high speed continuous wiping.

Limpiaparabrisas trasero

El interruptor en la parte superior de la palanca del limpiaparabrisas controla el limpiado y lavado de la ventana trasera:

  • Empuja el interruptor un clic hacia la derecha para encender el limpiaparabrisas trasero.
  • Para limpiar la luneta trasera, empuja y mantén presionado el interruptor completamente hacia la derecha. Suéltalo para dejar de limpiar.
  • Regresa el interruptor completamente a la izquierda (posición OFF) para apagar el limpiaparabrisas trasero.

Al lavar la luneta trasera, también se limpia la cámara de visión trasera.

  • Para ver este proceso en la pantalla de Infoentretenimiento, primero coloca el vehículo en reversa.
  • Empuja y mantén presionado el interruptor completamente hacia la derecha.

Posición de servicio

To activate the service position:

  1. Cerciórate de que el capó, y las puertas del conductor y del pasajero delantero estén cerradas.
  2. Switch the ignition on and then off again.
  3. Presiona brevemente y mantén presionado el botón en el fin de la palanca del limpiaparabrisas hasta el primer nivel.

Alternativamente:

  • You can activate the service position using the exit menu on the Infotainment screen for a limited period of time after the
    ignition is turned off.


Una vez en la posición de servicio:

  • Sujeta y levanta los brazos del limpiaparabrisas en la zona donde se unen a las escobillas.


Before Driving:

  1. Return the wipers to their original position by placing the wiper arms back against the windshield, holding them only where they attach to the wiper blades.
  2. Con el encendido activado, presiona brevemente y mantén presionado el botón al fin de la palanca del limpiaparabrisas hasta el primer nivel.

Warning: See Windshield Wipers in your Owner’s Manual for more detailed information and for important safety warnings.