Con los modos de conducción, puedes adaptar diversas propiedades de los sistemas del vehículo, como la suspensión, la dirección y los controles de climatización, a la situación de conducción actual, al confort de conducción deseado y a un estilo de conducción más económico. La disponibilidad de modos de conducción depende del equipamiento del vehículo.

Los modos de conducción disponibles pueden incluir:

• 
  Eco - Switches the vehicle to more fuel efficient operation compared to other driving modes.
• 
  Comfort - Offers a balanced calibration for everyday use.
• 
  Sport - Gives the driver a sporty feel; switches driving gear to S mode.
• 
  Offroad - Allows better control of acceleration with the accelerator pedal when driving off-road. The engine's braking efficiency is always available, and shifting can be blocked in critical situations. Hill Decent Control is active, and the dynamic cornering light is adapted to better assist when visibility is poor.
• 
  Snow - Can improve traction on slippery or snowy ground.
• 
  Custom - You can adapt the individual vehicle systems to your preferences.

Selección del modo de conducción

For vehicles with a driving mode button in the upper center console, below the infotainment screen:

1. Press the driving mode button .
2. Continue pressing the driving mode button until your desired mode is selected.
   OR
3. Toca el modo de conducción deseado en la pantalla del sistema de infoentretenimiento.

To adjust the rear seats:

• Pull the lever under the seat to slide the seat forward or backward.
• Press and hold the lever on the side of the seat to adjust the tilt of the backrest.

_{Always ensure the seat is locked into place after making an adjustment.}

For more information about rear seat adjustments:

Watch the Third-Row Seat Access video.

Ajuste de los espejos laterales

1. Encienda el arranque.
2. Gira la perilla de la puerta del conductor hasta el símbolo preferido:

L - Adjusts the left outside mirror
R - Adjusts the right outside mirror
0 - Neutral position; outside mirrors can't be adjusted and all functions are switched OFF

3. Para ajustar el espejo exterior seleccionado, mueve la perilla hacia adelante, hacia atrás, a la derecha o a la izquierda.

Desempañador de espejos laterales

Para encender la calefacción del espejo exterior, gira la perilla a . Esta función solo funciona cuando la temperatura del aire exterior está por debajo de aproximadamente 68 °F.

Folding in the Side Mirrors

If the vehicle is locked or unlocked from the outside, the outside mirrors will automatically fold in or out. For this to happen, the knob must be in the L, R, 0, or position.

If the knob is in the  position, the outside mirrors will remain folded in. 

Espejo retrovisor con atenuación automática

El espejo retrovisor interior contiene dos sensores para detectar la luz. Cuando el encendido está activado, los sensores miden la cantidad de luz que entra desde la parte delantera y trasera del vehículo. Dependiendo de los valores medidos, el espejo retrovisor interior se atenúa automáticamente.

La atenuación automática se desactivará en algunas situaciones, por ejemplo, cuando se enciende la iluminación interior o cuando se activa la marcha atrás.

Uso del acceso sin llave

Keyless Access makes it possible to unlock and lock your vehicle without actively using the key. A valid vehicle key must be present within the vicinity of the vehicle to use this function.

Desbloqueo con acceso sin llave

1. Asegúrese de tener su llavero con usted.

2. Slide your hand behind the door handle and wait for the door to unlock. Remember to avoid touching the indent on the front of the handle, or the door will remain locked.

3. Touch the unlocking sensor twice in a row to unlock the entire vehicle.

4. Tire de la manija para abrir la puerta.

Approach Unlock

You can also set the vehicle to automatically unlock when you approach it with a valid key fob on you:

1. Navigate to the Vehicle menu in the infotainment system
2. Select Exterior
3. Swipe through the pages to find and select Central locking
4. Toggle Unlock vehicle when approaching on or off as desired

Bloqueo con acceso sin llave

1. Asegúrese de tener su llavero con usted.
2. Toque su pulgar hasta la depresión de la cerradura en la manija.

Keyless Access Settings

To enable or disable Keyless Access functionality entirely:

1. Navigate to the Vehicle menu in the infotainment system
2. Select Exterior
3. Swipe through the pages to find and select Central locking
4. Toggle Active on or off as desired

To choose which doors to unlock when using keyless access:

1. Navigate to the Vehicle menu in the infotainment system
2. Select Exterior
3. Swipe through the pages to find and select Central locking
4. Next to Unlock doors, select which doors to lock or unlock with Keyless Access:
• All doors: Unlocks all vehicle doors
• Single door: Unlocks the door closest to where the key fob is detected
• Lado del vehículo: desbloquea todas las puertas del lado donde se detecta el mando

Uso de botones de cierre centralizado

Los botones de cierre centralizado situados en el interior de las puertas delanteras funcionan tanto con el motor encendido como apagado, pero solo cuando todas las puertas están cerradas.

• 
  Desbloquea el vehículo. 
• 
  Bloquea el vehículo.

Ambient lighting, if equipped, can provide indirect lighting in various areas of the vehicle interior.

The brightness and the color of the ambient lighting can be adjusted in the Infotainment system:

1. Cerciorarse de que el vehículo está estacionado.

2. Select Vehicle from the app overview on the Infotainment touchscreen.

3. Select Interior.

4. Selecciona la iluminación ambiental.

Personalization settings such as seat position, mirror angles, and radio presets are associated with the key fob. The vehicle will remember the settings most recently used with each key fob and will recall those when that key is used.

The driver seat and outside mirror settings can also be saved and recalled using the memory buttons, if equipped, located near the driver’s seat:

1. Ajuste las posiciones del asiento del conductor y de los espejos retrovisores exteriores a sus posiciones preferidas.
2. Press and release the SET button.
3. Press and hold the desired Memory button (1, 2, or 3) until the chime sounds. Memory button 3 is available on vehicles without the massage feature.

Volkswagen App-Connect takes your experience to the next level by bringing your favorite smartphone features directly to your vehicle's touchscreen display. Simply pair your smartphone to your VW's Bluetooth® to start using compatible apps. Need to charge your phone while staying connected? Plug it into a USB port or place it on the wireless charger, if equipped, to enjoy both convenience and power on the go.

_{Siempre preste atención a la carretera y no maneje si está distraído. No todas las funciones están disponibles para todos los sistemas operativos. Se aplican las tarifas estándar de uso de texto y datos. Las funciones de App-Connect requieren un dispositivo, un sistema operativo y aplicaciones móviles compatibles. Consulte los términos y la privacidad de los proveedores de dispositivos móviles y aplicaciones.}

Voice control¹ is an available technology in our vehicles that allows drivers and front passengers to perform various functions using spoken commands.

Some functions that the in-vehicle voice control system can perform are:

• Ingresar una dirección de navegación*.
• Buscar puntos de interés en las categorías enumeradas*.
• Control in-vehicle climate functions¹.
• Realizar llamadas telefónicas desde un dispositivo emparejado.
• Leer o dictar mensajes de texto desde un dispositivo emparejado.
• Cambiar la fuente de medios del vehículo, la emisora de radio o la frecuencia.

^{*Se aplica a vehículos equipados con navegación instalada de fábrica.}

A variety of voice commands are available, depending on which language has been set in the Infotainment system and whether there is an active Premium Speech² plan, which unlocks more voice control capabilities. For full details and a list of compatible languages, please refer to your Owner's Manual and our In-Vehicle Premium page.

A list of example voice commands can be found in your vehicle's Voice Control settings, as well as by accessing the "Help" menu in the Infotainment system and selecting Voice operation.

Initiating a voice command can be accomplished either by manually pressing the talk button on the multi-function steering wheel or by using the activation word, "Hello Volkswagen".

Activación manual

• A short press of the Talk button on the multi-function steering wheel activates the in-vehicle voice control¹.
• A long press of the Talk button on the multi-function steering wheel activates the digital assistant of a connected compatible mobile device.

Activación de la palabra de activación

To activate voice control¹ by voice with the activation word—also called the wake word—"Hello Volkswagen", you'll first need to enable it:

1. Press the Home  button on the Infotainment screen.
2. Select Settings.
3. Select Voice operation.
4. Scroll down to the "Activation word" section.
5. Toggle Active on or off as desired.
• If the activation word is disabled, you can still use voice control by pressing the Talk button  on the multi-function steering wheel.

IQ.DRIVE® is a driver assistance feature set designed to help make everyday driving more convenient and give added peace of mind. With a range of driver assistance features that work within system limitations, Volkswagen’s IQ.DRIVE® technology is meant to support you on the road and, in certain situations, may help mitigate the severity of a crash or even avoid one. IQ.DRIVE ® features and functionality may vary based on vehicle model, model year, and trim.

IQ.DRIVE® does not replace the driver and cannot overcome the laws of physics. Drivers should always remain attentive and in control of the vehicle.

Vea el video de descripción general de IQ.DRIVE.

System Limitations

In certain situations, driver assistance features may not engage or could trigger unwanted braking. While common examples are listed below, the full details about driver assistance functions and their limitations are available in the Owner’s Manual.

• Poor weather conditions, such as heavy rain, snow, ice, or fog.
• Unclear or missing lane markings, such as in construction zones or narrow curves.
• Blocked, damaged, or misaligned sensors due to things such as dirt, ice, leaves, or other external debris.
• A heavy trailer or cargo can change sensor angles and disable features.
• Sharp curves or steep slopes can cause lane centering or alerts to fail.
• Reduced visibility from environmental factors, such as glare
• Traffic detection limitations, meaning certain systems may only react to traffic traveling in the same direction.
• External interference from nearby ultrasonic sources or non-VW accessories.

You can access the driver assistance systems settings menu in the Infotainment system, allowing you to modify the operation of driver assistance features.

1. Press the Menu button.
2. Press the Assist Systems icon .
3. Touch the image that represents the feature you'd like to modify.
   OR:
4. Tap List or Settings (depending on your vehicle) to access a list of driver assistance system settings.

Depending on your vehicle, there may also be a button on the steering wheel, at the end of the turn signal stalk, or below the Infotainment screen.

^{Esta característica no es un sustituto de la atención al conducir.}

The Side Assist (Blind Spot Monitor) system helps the driver by detecting traffic behavior beyond the vehicle.

• La luz indicadora amarilla en el espejo lateral correspondiente se encenderá cuando se detecte un vehículo en el punto ciego de ese lado.
• El indicador amarillo parpadeará si se ha detectado un vehículo en el punto ciego y la señal de giro se ha activado en la dirección del vehículo detectado.
• La luz indicadora amarilla permanecerá encendida en lugar de parpadear si tu vehículo está siendo adelantado o si estás adelantando a un vehículo con una diferencia de velocidad de hasta aproximadamente 6 mph. No hay ningún indicador que indique si la velocidad de paso es claramente más rápida.

If both Side Assist (Blind Spot Monitor) and Lane Assist are enabled in the driver assistance systems settings, the yellow indicator light will blink if a lane change is attempted with a vehicle in the blind spot, even if the turn signal is used. Corrective steering may occur.

Watch the Active Blind Spot Monitor video.

^{Se aplica a los vehículos equipados con Asistencia de emergencia. Esta característica no es un sustituto de la atención al conducir.}

El asistente de emergencia puede reconocer la inactividad del conductor y mantener automáticamente el vehículo en su carril y, si es necesario, reducir la velocidad hasta detenerlo. Mientras el encendido está activado, la asistencia de emergencia está activa cuando:

• La asistencia de carril, el control de crucero adaptativo (ACC) o la asistencia de viaje están activos y el vehículo se encuentra en movimiento hacia adelante.
• The system can detect lane markers on the left and right sides of the vehicle.

If Lane Assist is disabled, Emergency Assist will not function unless Travel Assist is active.

Watch the Emergency Assist video.

^{Esta característica no es un sustituto de la atención al conducir.}

La alerta de tráfico trasero monitorea el tráfico cruzado detrás del vehículo al retroceder de un espacio o al maniobrar. Los sensores de radar situados detrás la cubierta del parachoques trasero monitorizan las zonas traseras y laterales del vehículo.

In the event of approaching moving objects, the driver is warned of the obstacle. If the driver does not respond, automatic braking support may kick in.

Watch the Rear Traffic Alert video.

^{Esta característica no es un sustituto de la atención al conducir.}

El sistema de asistencia delantera puede reconocer colisiones inminentes por delante y advertir al conductor. Además, el sistema puede proporcionar soporte al frenar e iniciar una maniobra de frenado automático. El sistema de asistencia delantera puede ayudar a evitar accidentes, pero no puede sustituir la atención del conductor.

Watch the Front Assist video.

Front Assist can recognize the following objects, depending on vehicle equipment and system limitations:

• Vehículos.
• Peatones.
• Bicycles.

La forma en que la asistencia delantera reacciona ante estos objetos depende de:

• El tipo de objeto.
• La dirección en la que se mueve el objeto.
• La velocidad del objeto.
• La velocidad de tu vehículo.

The myVW mobile app¹ takes ownership to the next level, putting essential tools and information at your fingertips. Gain access to model-specific resources like video tutorials and owner's literature and stay informed of active factory coverages.

Watch the myVW Self-Enrollment video.

With the myVW app¹, you can enroll in and access a range of connected services and plans enabled by myVW+².

To see which plans are available for your vehicle, visit the Shop tab of the myVW app. For full details, visit our Connected Services page.

Watch the myVW+ Overview video.

With the Remote Access¹ and VW Vehicle Insights² plans, you can access remote features from the Home tab of the myVW app³. Here, you'll be able to:

• View your vehicle's door and window status, estimated fuel level, and odometer⁴.
• Remote start your vehicle⁵, lock or unlock your doors⁶, and if you need some help finding your parked vehicle, you can honk the horn and/or flash your lights⁷, and find your vehicle's last parked location⁸.
• Set vehicle alerts to keep track of features like your vehicle's speed and location⁹.
• Check your driving data and potentially save more by signing up for available insurance discounts with DriveView¹⁰.

Remote Start Using the myVW App

Start your vehicle remotely⁵, if remote start is equipped, using the myVW app³. Here's how:

1. Log in to the myVW app.
2. From the home screen, select Remote Start.
3. Tap Start.
4. When prompted, confirm the vehicle location by entering your four-digit PIN.
   • If enabled, iOS devices may use Face ID for authentication instead of entering the PIN.
5. A "success" message and countdown timer should appear on the home screen to indicate the vehicle has been started.
   • If the remote start request is unsuccessful, a notification will appear and ask that you try again.

Bloquear/desbloquear con myvw app

Lock or unlock your vehicle doors⁶ from your myVW app³. Here's how:

1. Log in to the myVW app.
2. From the home screen, select Doors.
3. Tap either Lock or Unlock.
4. A "success" message appears on the home screen to indicate the doors have either locked or unlocked.
   • If the lock or unlock request is unsuccessful, a notification will appear and ask that you try again.

Toca la bocina y enciende las balizas con myVW app.

Use the Honk & flash⁷ feature to help you find your vehicle in a crowded parking lot, or in situations where you need to get attention. Here's how:

1. Log in to the myVW app³.
2. From the home screen, select Honk & flash.
3. Tap either:
   • Flash lights to only flash the vehicle headlights.
   • Honk & flash to flash the headlights and honk the horn.
4. A "success" message appears on the home screen to indicate that the "Flash lights" or the "Honk & flash" request was successful.
   • If the "Flash lights" or "Honk & flash" request is unsuccessful, a notification will appear and ask that you try again.

Configuración de alertas de vehículos

Vehicle alerts⁹ in the myVW app³ allow you to easily set boundaries to help you keep track of things like your vehicle's speed and location.

Establece una alerta de límites

Boundary Alerts⁹ lets you know when your vehicle enters or exits a designated area. Up to four boundary alerts can be set. Here's how:

1. Log in to the myVW app³.
2. From the home screen, select the ellipsis (three dots) in the upper right corner next to your vehicle's image.
3. Choose Set up vehicle alerts from the dropdown menu.
4. Choose Boundary.
5. Select Create Boundary Alert and set your location either by clicking on the map or searching for a place in the search bar.
6. Set the radius either by using the + button or by moving the slider to the right to increase the radius from 0-25 miles.
7. Después de que la ubicación se haya establecido, en la pantalla "Crear alerta de límite", podrás hacer l siguiente:

• Personalizar el nombre del perímetro en el campo "Nombre de la alerta".
• Ajusta la fecha, la hora y el evento, si así lo deseas.
• Modifica la configuración de notificaciones para enviar alertas cuando el vehículo entre y/o salga del radio indicado.
• Establece la frecuencia de la alerta.
• Gestiona a quién notificará esta alerta de límites.
• Tip: New contacts can be added by selecting Manage alert contacts in the "Email alert" and "Text (SMS) alert" submenus.

Establece una alerta de toque de queda

Curfew Alerts⁹ can help you keep track of when your vehicle is in use during a specific timeframe that you set. Up to two curfew alerts can be set at a time. Here's how:

1. Log in to the myVW app³.
2. From the home screen, select the ellipsis (three dots) in the upper right corner next to your vehicle's image.
3. Choose Set up vehicle alerts from the dropdown menu.
4. Choose Curfew.
5. Select Create Curfew Alert and in the next menu, customize the following settings:

• Personaliza el nombre de la alerta de toque de queda en el campo "Nombre de la alerta".
• Ajusta la hora, el día y el evento, si lo deseas.
• Configurar frecuencia de la alerta.
• Gestiona a quién notificará la alerta de toque de queda.
• Tip: New contacts can be added by selecting Manage alert contacts in the "Email alert" and "Text (SMS) alert" submenus.

Establece una alerta de velocidad

Get a heads-up when your vehicle is driven faster than you'd like by setting a Speed Alert⁹. Up to two speed alerts can be set at a time. Here's how:

1. Log in to the myVW app³.
2. From the home screen, select the ellipsis (three dots) in the upper right corner next to your vehicle's image.
3. Choose Set up vehicle alerts from the dropdown menu.
4. Choose Speed.
5. Select Create Speed Alert and in the next menu, customize the following settings:

• Personaliza el nombre de la alerta de velocidad en el campo "Nombre de la alerta".
• Establece la velocidad máxima con los botones + y - o al mover el control deslizante a la velocidad deseada (hasta 80 mph).
• Consejo: al utilizar los botones + y -, el valor en mph se ajusta en incrementos de 5, mientras que el control deslizante de velocidad se puede utilizar para ajustar el valor en mph en incrementos de 1.

• Ajusta la hora, el día y el evento, si lo deseas.
• Configurar frecuencia de la alerta.
• Gestionar a quién notificará la alerta de velocidad.
• Tip: New contacts can be added by selecting Manage alert contacts in the "Email alert" and "Text (SMS) alert" submenus.

Establece una alerta de estacionamiento

When you set the Valet Alert⁹, myVW creates a 0.25-mile radius from where your vehicle is located. You’ll be notified if your vehicle leaves that radius, so you can valet or park your car with peace of mind. Here's how:

1. Log in to the myVW app³.
2. From the home screen, select the ellipsis (three dots) in the upper right corner next to your vehicle's image.
3. Choose Set up vehicle alerts from the dropdown menu.
4. Choose Valet.
5. Select Create Valet Alert and in the next menu, you can:

• Establece la frecuencia de la alerta.
• Gestiona a quién se notificará la alerta de valet.
• Tip: New contacts can be added by selecting Manage alert contacts in the "Email alert" and "Text (SMS) alert" submenus.